When ordering the ONwheel additional mounting kit, please note the following details and select them according to your own bicycle:
(For more information on mounting the ONwheel, please refer to the go-e website under the Mounting tab or download the manual available on the site)
1. Battery position:
Select the position on the frame where you want to attach the battery holder. Depending on the battery position, we will send out the additional mounting kit with a different cable length.
On the down tube of the bike.
On the top tube of the bicycle.
Does your bicycle have a bike stand plate or a cross tube between the bottom bracket and rear wheel? In the case of a cross tube, you also need the optional mounting set to attach the mounting plate to the cross tube.
Example of a bike stand plate.
Example of a cross tube.
3. PAS side (Assembly of magnetic disc or magnetic ring):
Does your bike have enough space on the non chainring side (left bike side) to mount a magnetic disc or do you need a magnetic ring for the smallest chainring on the chainring side (right bike side)?
The magnetic disc can be fitted on the non chainring side if there is at least 5 mm clearance between the bottom bracket and the start of the pedal. If this is not the case, you must use the magnetic ring (see picture below).
The magnetic ring is attached to the smallest gearwheel on the chainring side.
|Shipping weight:||1.20 Kg|
|Product weight:||1.20 Kg|