go-eShop cookies policy

This shop uses cookies for technical reasons and to provide you with the best possible experience. Continued use of the shop indicates that you accept this policy. (more information)

go-eCharger HOME+ 22 kW

Item number: CH-02-00-0

EAN: 9120087410019

Our smallest wallbox with 22 kW for charging electric vehicles at home, company parking lots and on the road with built-in type 2 socket and CEE red 32 A plug for direct connection to the corresponding three-phase socket.

Optional adapters for other sockets are available. Please ensure that you order suitable adapters specifically for the go-eCharger HOME+ 22 kW.
Variant

699,00 €

including20% VAT. , plus shipping (Paket)

Available now!

There are variations of this item. Please select the variation you wish.


The go-eCharger HOME+ 22 kW is a wallbox for charging electric vehicles, which can also be transformed into a mobile charging station in a few seconds. It is suitable for garages and outdoor parking areas, e.g. in front of residential buildings and companies (without selling charging current). The charger can be connected directly to an existing CEE 32 A three-phase socket or to other sockets via an adapter.

The charging station with a maximum charging capacity of 22 kW is equipped with numerous intelligent functions at no extra cost. Our principle for the go-eCharger HOME + 22 kW - fully equipped at an unbeatable price-performance ratio. In addition to extensive security functions such as phase detection, grounding measurement or adapter detection, the box is equipped with RFID for access control and WLAN with hotspot function and can therefore be personalized and updated via the corresponding app. PV connection via the API interface, load balancing and electricity price exchange connection are also part of the functional scope. Further information and downloads can be found here.

Scope of delivery:

  • Charging station 22 kW* with 32 A CEE plug
  • Wall mount including screws and dowels
  • Optionally mountable cable protection (anti-theft protection)
  • One reset card and one RFID chip
  • One spare special fine fuse
  • Short instructions

Product specifications:

  • Dimensions: approx. 15 x 25 x 9 cm
  • Weight: approx. 2.0 kg
  • Connection cable: 30 cm + plug

Charging Capacity:

  • Maximum charging power 22 kW (32 A 3-phase)
  • Charging power adjustable between 1.4 kW and 22 kW [depending on the number of phases (1-, 2- or 3-phase) and selected amperes (adjustable in 1 ampere steps between 6 A and 32 A)]

Connection on vehicle side:

  • CEE red 32 A (three-phase)
  • With optional adapters (not included in delivery):
    • CEE red 16 A (three-phase)
    • CEE blue 16 A (single-phase)
    • CEE blue 32 A (single-phase)
    • multiple domestic plugs 16 A (household socket outlet)

Connection on vehicle side:

  • Type 2 socket, own type 2 cable required (not included in delivery)
  • Locking device (theft protection)
  • Vehicles with type 1 can be charged with adapter cable
  • Ampere and charging status readable via LED ring or app
  • Charging power adjustable via button and app

Safety functions:

  • RFID access control
  • RCD protection device with DC detection, 30 mA AC, 6 mA DC
  • Phase and voltage test of the input voltage
  • Phase test after contactor
  • Current sensor three-phase
  • Ground check (switchable grounding monitoring)
  • Customer replaceable fine fuse for internal electronics (triggers if the supply line is connected incorrectly)
  • Adapter detection with automatic reduction to 16 A
  • IP54 - Protection against dirt and water, suitable for permanent outdoor use
  • go-e network operator API for authorised access of the electricity network operator to the go-eCharger for network related power control

App and connectivity:

  • Local (WLAN hotspot) or worldwide (via home WLAN) usable
  • Charge monitoring (voltage, current, power, energy)
  • Start/stop function
  • RFID card management (up to 10 users per charger)
  • Timer
  • Electricity meter (total kWh and total amount per RFID card)
  • Max Wh charging
  • Access management (RFID/App)
  • Cable Lock/Unlock functions
  • Electricity price exchange connection with intelligent charge management
  • Load balancing
  • Photovoltaic connection via open API interface (programming required) or go-eController (separate product)
  • LED adjustment
  • Management of the charging levels via button on the charging box
  • Modbus TCP (firmware version 0.40 or higher) for power control by the electricity network operator
  • Updateable for later functions (Smart Home, etc.)

*Please note our information on country-specific obligation to register and/or get approval from the electricity network operator.


Shipping weight: 3.50 Kg
Product weight: 2.26 Kg

Average product review

4 Stars
1
3 Stars
2 Stars
1 Star

All reviews

Share your experience with other customers:

Total entries: 1
4 from 5 Good hardware, software can be improved

Build and material quality pretty good, it delivers the promised charging power and leds are nice and useful.

Software can be improved: when cloud connected it often stop working and appear offline if it cannot find internet. Connect to it directly does not help.

., 31.12.2018
Total entries: 1

Please login first to add a tag.