go-eCharger HOME+ 22 kW

Item number: CH-02-00-0

EAN: 9120087410019

Our smallest wallbox with 22 kW for charging electric vehicles at home, company parking lots and on the road with built-in type 2 socket and CEE red 32 A plug for direct connection to the corresponding three-phase socket.

Optional adapters for other sockets are available. Please ensure that you order suitable adapters specifically for the go-eCharger HOME+ 22 kW.

699,00 €

including 20% VAT. , plus shipping (Paket)

There are variations of this item. Please select the variation you wish.

The go-eCharger HOME+ 22 kW is a wallbox for charging electric vehicles, which can also be transformed into a mobile charging station in a few seconds. It is suitable for garages and outdoor parking areas, e.g. in front of residential buildings and companies (without selling charging current). The charger can be connected directly to an existing CEE 32 A three-phase socket or to other sockets via an adapter.

The charging station with a maximum charging capacity of 22 kW is equipped with numerous intelligent functions at no extra cost. Our principle for the go-eCharger HOME + 22 kW -  fully equipped at an unbeatable price-performance ratio. In addition to extensive security functions such as phase detection, grounding measurement or adapter detection, the box is equipped with RFID for access control and WLAN with hotspot function and can therefore be personalized and updated via the corresponding app. PV connection via the API interface, load balancing and electricity price exchange connection are also part of the functional scope. Further information and downloads can be found here.


Scope of delivery:

  • Charging station 22 kW* with 32 A CEE plug
  • Wall mount including screws and dowels
  • Optionally mountable cable protection (anti-theft protection)
  • One reset card and one RFID chip
  • One spare special fine fuse
  • Short instructions

Product specifications:

  • Dimensions: approx. 15 x 25 x 9 cm
  • Weight: approx. 2.0 kg
  • Connection cable: 30 cm + plug
  • Rated voltage: 230/400 V depending on number of connected phases
  • Rated frequency: 50 Hz

Permissible ambient conditions:

  • Temperature: -25 °C to + 40 °C
  • Average temperature in 24 hours: below 35 °C
  • Altitude: maximum 2,000 m above sea Level
  • Relative humidity: maximum 95 % (non-condensing)

Charging Capacity:

  • Maximum charging power 22 kW (32 A 3-phase)
  • Charging power adjustable between 1.4 kW and 22 kW (via the charging current in 1 ampere steps between 6 A and 32 A) depending on the number of phases of the car:
    • single-phase: 1.4 kW to 7.4 kW
    • two-phase: 2.8 kW to 14.8 kW (ATTENTION: two-phase connection of the charger is not possible! This information applies to vehicles which have a two-phase onboard charger installed! The go-eCharger has to be connected single-phase (via adapter) or three-phase!)
    • three-phase: 4.2 kW to 22 kW (The go-eCharger switches through the power that is made available to it at the connection.)

Connection on vehicle side:

  • CEE red 32 A (three-phase)
  • With optional adapters (not included in delivery):
    • CEE red 16 A (three-phase)
    • CEE blue 16 A (single-phase)
    • CEE blue 32 A (single-phase)
    • multiple domestic plugs 16 A (household socket outlet)

Connection on vehicle side:

  • Type 2 socket, own type 2 cable required (not included in delivery)
  • Locking device (theft protection)
  • Vehicles with type 1 can be charged with adapter cable
  • Ampere and charging status readable via LED ring or app
  • Charging power adjustable via button and app

Safety functions:

  • RFID access control
  • RCD protection device with DC detection, 30 mA AC, 6 mA DC
  • Phase and voltage test of the input voltage
  • Phase test after contactor
  • Current sensor three-phase
  • Ground check (switchable grounding monitoring)
  • Customer replaceable fine fuse for internal electronics (triggers if the supply line is connected incorrectly)
  • Adapter detection with automatic reduction to 16 A
  • IP54 - Protection against dirt and water, suitable for permanent outdoor use
  • Impact resistance = IK10
  • Protection class = I
  • Pollution degree = II
  • go-e network operator API for authorised access of the electricity network operator to the go-eCharger for network related power control

App and connectivity:

  • Local (WiFi hotspot) or worldwide (via WiFi) usable
  • Charge monitoring (voltage, current, power, energy)
  • Start/stop function
  • RFID card management (up to 10 users per charger)
  • Scheduler
  • Electricity meter (total kWh and total amount per RFID Card)
  • Synchronisation of charging processes with the cloud and display of past charging processes (from go-eCharger serial numbers with CM-03-)
  • Max Wh charging
  • Access management (RFID/App)
  • Cable Lock/Unlock functions
  • Automatic unlocking of the charging cable in the event of a power failure (from go-eCharger serial numbers with CM-03-)
  • Electricity price exchange connection with intelligent charge management
  • Load balancing (static)
  • 1-/3-phase switching via app - also during charging (from go-eCharger serial numbers with CM-03-)
  • Photovoltaic connection via open API interface (programming required)
  • LED adjustment
  • Management of the charging levels via button on the charging box
  • Modbus TCP (firmware version 0.40 or higher) for power control by the electricity network operator
  • Updateable for later functions (Smart Home, etc.)

*Please note our information on country-specific obligation to register and/or get approval from the electricity network operator.

Shipping weight: 3.45 Kg
Product weight: 1.91 Kg

Average product review

5 Stars
3 Stars
2 Stars
1 Star

All reviews

Share your experience with other customers:

Total entries: 9
5 from 5 Mobile Fast Charger

Quality, useful and fast charger. It should be in an electric car.

., 26.07.2018
5 from 5 Turkiyeden satın almak için iletişime geçiniz

Instagram: goe.charger_turkey
Tel: 05070944727

., 16.08.2018
5 from 5 Excellent

Small, efficient, smart connected Device!
API available for Developers.

., 14.11.2018
5 from 5 Perfect

super quick installation, light use
excellent product

., 25.06.2019
5 from 5 Very good

Well funktion

., 21.01.2020
5 from 5 Best portable charger which can be integrated into a solar house

It is portable but you can still integrate into your house to maximize solar charge using the API.
Nice LED light show while charging, customizable color and light intensity
Internal energy meter is very useful to get the actual car charging power.
And on top of it a phone application.

., 09.06.2020
5 from 5 Small and good quality

The MQTT message can be beater.

., 18.06.2020
5 from 5 Looks good, robust and can be controlled from anywhere

I have two car ports quite far away from each other and 2 EVs. I didnt want to have 2 chargers, nor did I want to shuffle the cars around every time I wanted to charge them, hence I needed a portable charger. I also take the go-e with me to hotels and my parents house in the countryside. I can charge faster if theres a suitable plug and I can also charge slower where the electrical system is 30-40 years old and might not like the constant 10A of my factory EV charger. Excellent price/performance ratio in my opinion.

., 10.07.2020
5 from 5 Perfect !!

Very easy installation, control of the device by Internet or Bluetooth, very easy to use, very happy with my purchase !!!

., 24.07.2020
Total entries: 9

Please login first to add a tag.