go-e Charger Gemini flex 11 kW

go-e Charger Gemini flex 11 kW

The compact size and low weight of the go-e Charger Gemini flex 11 kW allow the mobile wallbox to be used at home, in front of company buildings or when travelling. This makes the go-e Charger Gemini flex a reliable companion even when camping or visiting friends.

Simply plug the go-e Charger Gemini flex 11 kW into a red CEE 16 A socket or into other sockets using an adapter and the charging process begins immediately. Please make sure to use the appropriate original adapter especially for the go-e Charger Gemini flex 11 kW. It is not necessary to open the go-e Charger as part of the installation process. The device must never be opened in any other case.

Country of origin: Austria

Safe charging with the go-e Charger

The go-e Charger Gemini flex is equipped with numerous safety functions. DC fault detection, phase or earth detection and other functions guarantee safe charging in all situations. The charging station for electric cars thus protects everything that is important to you.

The go-e Charger Gemini flex convinces

The wallbox received a score of 1.3 in the Home & Garden Test and impressed with its convenient usability at home and on the road, the possibility of charging with flexible electricity tariffs and many other features. The wallbox was praised as the ideal solution for entering the e-car business. In addition, the go-e Charger Gemini flex was awarded the price-performance winner in the wallbox test 2023 by Auto Bild and P3. The easy installation received special praise.

Due to legal regulations, the go-e Charger Gemini flex must not be used in Norway.

go-e Charger Gemini flex 11 kW

• 11 kW wallbox* with 16 A CEE red plug
• Wall bracket incl. screws and dowels
• Optionally mountable anti-theft device (U-piece)
• One reset card
• One RFID chip (already taught-in)
• Brief instructions

*Please note our information on a country-specific registration and/or authorisation requirement with the electricity grid operator.

Charging Power

• Maximum charging power: 11 kW (16 A 3-phase)
• Ampere and status display: Readable via LED ring and app
• Setting the charging power: Via push button and app
• Charging power adjustable between 1.4 kW and 11 kW depending on the number of phases of the car's onboard charger (via charging current in 1 ampere steps between 6 A and 16 A):

• Single-phase charging car: 1.4 kW to 3.7 kW (country-specific limitations must be observed).
• Two-phase charging car: 2.8 kW to 7.4 kW (two-phase connection of the charger is not possible)
• Three-phase charging car: 4.2 kW to 11 kW (go-e Charger switches through the power that is available at the connection)

Product specifications

• Mobile wallbox/charging station: IC-CPD, according to EN IEC 61851-1:2019, EN IEC 62752:2016/A1:2020
• Dimensions: approx. 15.5 x 26 x 11 cm
• Weight: approx. 1.63 kg
• Connection cable: 30 cm + plug, 5 x 2.5 mm² (type H07BQ-F)
• Connection: single-phase or three-phase
• Rated voltage: 230 - 240 V (single-phase) / 400 - 415 V (three-phase
• Rated frequency: 50 Hz
• Mains types: TT/TN/IT
• Standby power: 3.1 W (LEDs dark) to 5.2 W (LEDs bright)
• RFID: 13.56 MHz
• WLAN: 802.11b/g/n 2.4 GHz / frequency band 2412-2472 Mhz

Permissible ambient conditions

• Installation location: Indoors and outdoors
• Operating temperature: -25 °C to + 40 °C
• Storage temperature: -40 °C to + 85 °C
• Average temperature in 24 hours: Maximum 35 °C
• Altitude: Maximum 2,000 m above sea level
• Relative humidity: Maximum 95 % (non-condensing)
• Impact resistance: IK08

Connection to infrastructure

• CEE red 16 A (3-phase)
• With original go-e adapters (available as accessories):

• 11 kW Gemini flex to CEE red 32 A (three-phase - limited by charging box to 16 A)
• 11 kW Gemini flex to CEE blue 16 A (single-phase)
• 11 kW Gemini flex to safety plug 16 A (household socket - single-phase)

Connection to vehicle

• Type 2 socket (according to EN 62196-2) with mechanical locking (own type 2 cable required, available as accessory)
• Vehicles with type 1 can be charged with adapter cable type 2 to type 1 (available as accessory)

Safety

• Integrated DC protection module with DC detection and additional AC detection (6 mA DC, 20 mA AC). On the building side, an RCD type A must be installed and a miniature circuit breaker must be installed upstream. The local installation regulations must be observed.
• Protection class: I
• Pollution degree: II
• Anti-theft device: Locking of the charging cable
• Access control: Can be activated if required. Authentication via RFID or App possible. One learned RFID chip is already included.
• Input voltage: Phase and voltage check
• Switching functions: Switching function test
• Earthing test: For TT, TN mains (disconnectable earthing test for IT mains - Norway mode)
• Current sensor: 3-phase
• Temperature sensors: Regulation of the charging current in case of overtemperature
• IP65: Protection against dirt and water, suitable for permanent outdoor operation
• go-e grid operator API: For authorised access of the electricity grid operator to the go-e Charger for grid-serving power control
• Modbus TCP: e.g. for grid-serving power control by the electricity grid operator.

App and connectivity

• Local (WiFi hotspot) or worldwide** (WiFi) control and monitoring.
• Setting/checking the charge (voltage, current, power, energy)
• Adjustment of current level in 1 ampere steps
• Start/stop function
• RFID chip/card management (up to 10 users per charger) / access management (RFID/app)
• Scheduler
• Electricity meter (total kWh and total amount per RFID chip)
• kWh Limit Mode / Eco Mode** / Daily Trip Mode**
• Push notifications**
• Cable release functions
• Flexible electricity tariffs with intelligent charging management**/***
• Static load balancing**
• Photovoltaic connection via go-e controller (separate product) or open API interface (programming required) or alternative energy management system**
• OCPP 1.6**
• LED adjustment
• Management of charging levels via push-button on charging station
• Updateable for later functions (Smart Home, etc.)**
• Automatic unlocking of the charging cable in case of power failure
• 1-/3-phase switching via app or automatically with go-e Controller - even during the charging process
• Synchronisation of charging processes with the cloud and display of past charging processes**.
• Documented public API interfaces: HTTP, MQTT, Modbus TCP

**Internet connection of the charger required

***Contract required with an electricity provider whose flexible electricity tariff is integrated in the go-e app. Several 100 tariffs are stored. The number of tariffs is constantly being expanded.