go-eCharger HOME+ 11 kW B-Quality

Item number: CH-02-17-2

EAN: 9120087410293

Our smallest wallbox with11 kW for charging electric vehicles at home, company parking lots and on the road with built-in type 2 socket and CEE red16 A plug for direct connection to the corresponding three-phase socket.

Optional adapters for other sockets are available. Please ensure that you order suitable adapters specifically for the go-eCharger HOME+ 11 kW.

B-quality articles have slight discolorations and/or minor grinding or scratching marks on the case. Technically the products are new and identical to the top A-quality devices.


649,00 €

including20% VAT. , plus shipping (Paket)

Shipping time: 5 days

The go-eCharger HOME+11 kW is a wallbox for charging electric vehicles, which can also be transformed into a mobile charging station in a few seconds. It is suitable for garages and outdoor parking areas, e.g. in front of residential buildings and companies (without selling charging current). The charger can be connected directly to an existing CEE16 A three-phase socket or to other sockets via an adapter.

The charging station with a maximum charging capacity of11 kW is equipped with numerous intelligent functions at no extra cost. Our principle for the go-eCharger HOME +11 kW - fully equipped at an unbeatable price-performance ratio. In addition to extensive security functions such as phase detection, grounding measurement or adapter detection, the box is equipped with RFID for access control and WLAN with hotspot function and can therefore be personalized and updated via the corresponding app. PV connection via the API interface, load balancing and electricity price exchange connection are also part of the functional scope. Further information and downloads can be found here.

Scope of delivery:

  • B-quality Charging station 11 kW* with16 A CEE plug
  • Wall mount including screws and dowels
  • Optionally mountable cable protection (anti-theft protection)
  • One reset card and one RFID chip
  • One spare special fine fuse
  • Short instructions

Product specifications:

  • Dimensions: approx. 15 x 25 x 9 cm
  • Weight: approx. 2.0 kg
  • Connection cable: 30 cm + plug
  • Rated voltage: 230/400 V depending on number of connected phases
  • Rated frequency: 50 Hz

Permissible ambient conditions:

  • Temperature: -25 C to + 40 C
  • Average temperature in 24 hours: below 35 C
  • Altitude: maximum 2,000 m above sea Level
  • Relative humidity: maximum 95 % (non-condensing)

Charging Capacity:

  • Maximum charging power 11 kW (16 A 3-phase)
  • Charging power adjustable between 1.4 kW and 11 kW (via the charging current in 1 ampere steps between 6 A and 16 A) depending on the number of phases (not adjustable at the go-eCharger!):
    • single-phase: 1.4 kW to 3.7 kW
    • two-phase: 2.8 kW to 7.4 kW (ATTENTION: two-phase connection of the charger is not possible! This information applies to vehicles which have a two-phase onboard charger installed! The go-eCharger has to be connected single-phase or three-phase!)
    • three-phase: 4.2 kW to 11 kW (The go-eCharger switches through the power that is made available to it at the connection.)


  • CEE red16 A (three-phase)
  • With optional adapters (not included in delivery):
    • 11 kW HOME+ to CEE red32 A (three-phase - limitation by charging box to 16 A)
    • 11 kW HOME+ to CEE blue 16 A (single-phase)
    • 11 kW HOME+ to multiple domestic plugs 16 A (household socket outlet)

Connection on vehicle side:

  • Type 2 socket, own type 2 cable required (not included in delivery)
  • Locking device (theft protection)
  • Vehicles with type 1 can be charged with adapter cable
  • Ampere and charging status readable via LED ring or app
  • Charging power adjustable via button and app

Safety functions:

  • RFID access control
  • RCD protection device with DC detection, 30 mA AC, 6 mA DC
  • Phase and voltage test of the input voltage
  • Phase test after contactor
  • Current sensor three-phase
  • Ground check (switchable grounding monitoring)
  • Customer replaceable fine fuse for internal electronics (triggers if the supply line is connected incorrectly)
  • IP54 - Protection against dirt and water, suitable for permanent outdoor use
  • Impact resistance = IK10
  • Protection class = I
  • Pollution degree = II
  • go-e network operator API for authorised access of the electricity network operator to the go-eCharger for network related power control

App and connectivity:

  • Local (WiFi hotspot) or worldwide (via WiFi) usable
  • Charge monitoring (voltage, current, power, energy)
  • Start/stop function
  • RFID card management (up to 10 users per charger)
  • Timer
  • Electricity meter (total kWh and total amount per RFID card)
  • Max Wh Charging
  • Access management (RFID/App)
  • Cable Lock/Unlock functions
  • Electricity price exchange connection with intelligent charge management
  • Load balancing
  • Photovoltaic connection via open API interface (programming required)
  • LED adjustment
  • Management of the charging levels via button on the charging box
  • Modbus TCP (firmware version 0.40 or higher) for power control by the electricity network operator
  • Updateable for later functions (Smart Home, etc.)

*Please note our information on country-specific obligation to register and/or get approval from the electricity network operator.

Shipping weight: 3.23 Kg
Product weight: 1.69 Kg

Average product review

Share your experience with other customers:

Please login first to add a tag.